In some cases a reverse osmosis water filter system may not be able to maintain the minimum water pressure consistently. The ice maker operates on water pressure of 20 psi (1.4 bar) to 100 psi (6.9 bar). To obtain local dealer information, visit the Locator section of our website, .Ī line filter is required when water conditions have a high sediment content. A saddle valve kit (4200880) is available from your Sub-Zero dealer. This shut-off valve should not be installed behind the unit.ĭo not use self-piercing valves. Connect a 1/ 4' OD copper line to the house supply, being sure to use an easily accessible shut-off valve between the supply and the unit. Refer to page 11 for additional information.įor Integrated models with an automatic ice maker, rough in the water supply line. Two Integrated units may be installed next to one another. We recommend using D-style handles, which should be located on the opposite side from the hinge, centered on the cabinet door and the top, center area of the drawer panel. Any decorative base molding must be removable for possible servicing and cleaning of the condenser.

You must keep a minimum space of 4' (102) clear below the bottom edge of the lower drawer panel, so the unit can be properly vented. Drawer panels must be a minimum of 5/ 8' (16) thick.įor the bottom drawer, the maximum panel height is 16 11/ 16' (424). The weight of each drawer panel cannot exceed 16 lbs (7 kg). Door panels must be a minimum of 5/ 8' (16) thick. Refer to the full-scale illustrations at the end of this section for specifics on panels and door openings.ĭoor panels can grow beyond 45 3/ 8'(1153) and exceed the 80' (2032) height to accommodate any size of door as long as you stay below the recommended door panel weight limit of 53 lbs (24 kg). They can be used with framed as well as frameless cabinets. Integrated units are compatible with virtually any style of cabinetry. The anti-tip bracket must be installed to prevent the unit from tipping forward.

Refer to the installation illustration on page 4. This will require a minimum rough opening depth of 25' (635). Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.ħ36TC(I) is 24' (610) from the front of the unit to its back.

Sub zero door panel installation